Heating Furnace Repair Work in New Jersey|PREVIOUS|MAIN|NEXT|
home >> heating >> edgewater-nj >>
The initial sign of a furnace issue is that very first cold day when your furnace turns on and there is no heat. You recall that it functioned great the last time it was on in April, what could have taken place over the summer and autumn?
HVAC Repair Companies
We always suggest calling an expert to repair furnaces for security and peace of mind. However there are some obvious repairs you can do yourself before you call us that may turn your heat back on.
Start by checking your thermostat. The thermostat must be toggled to “heat” and “on”. If it is a battery-powered thermostat, change the batteries if you haven’t changed them in the last year. If you have a programmable thermostat, examine the day and time is set to be “on” right now.
Have you checked the breaker for your furnace to make certain it hasn’t tripped? You can switch off the breaker and check the fuse if the breaker was “on”. You can also toggle the switch on and off to see to it the switch stays in the ON setting. If it does not remain on, you have an electric trouble with the circuit.
Home Furnace Repair
No or limited air flow leading to no heat might be the result of a blocked furnace air filter. To inspect your New Jersey’s furnace filter, hold it up to the light. If you can’t see light coming through, the filter is clogged and you need to change the filter. It is a good suggestion to buy two filters and switch out your filter twice a year, once in springtime and once in fall. Remember that these air filters are engineered for one-way air flow. Make certain the filter is inserted the correct air flow direction.
Your furnace’s heaters can become blocked or obstructed and as a result, your heater is contaminated with particulates and this must be taken care of right away. A sure indicator of burner contamination is if the burner flames are yellow, not constantly blue and even. Over the summer, dust and residue can accumulate on the heaters and an annual maintenance cleaning is all it takes to keep your furnace burners functioning efficiently.
Many heaters have electronic ignitions and these can malfunction. A fast solution is to turn the furnace power on and off to reset the ignition. If this does not work, it might be a sign that there is something else causing the pilot to not work properly. This could be a damaged heating element, and if so, you need to have a certified service specialist go over the burner to inspect if it is split or otherwise rendered unusable.
What happens if you discover your furnace isn’t blowing air whatsoever? This could be a problem with the thermostat, blower motor, transformer, control board or capacitor. First make sure that the blower isn’t obstructed in any way. Then, if you have inspected the thermostat and it is adjusted correctly, a professional ought to have a look at the other possible causes noted previously for issues and perhaps replacement of that part.
Your furnace has a control appropriately named a limit switch. A malfunction with this switch might cause the blower to run all the time, even though your thermostat is set to “auto”. Figuring out if the trouble is with the thermostat or limit switch is pretty easy. The limit switch is a fail safe type of device: if the furnace becomes too hot, the heating element shuts off immediately when it receives a signal from the limit switch. If the blower still runs all the time, but there is no heat, the high limit switch may be responsible and your a/c service technician will certainly change the switch.
Did you know that your furnace door has a safety switch? The access panel is wired to ensure that when the door is open, the furnace will not light and the blower fan will not turn on. Examine your access door to make sure that it is fully closed if your furnace is not turning on.
Oil or Gas Furnace Repair
If you have a gas or oil furnace, you have a gas or oil supply line that is running to your furnace. This supply line has a shut off valve close by. You can inspect to see if somehow over the summer season the fuel supply line to your furnace was unintentionally closed. The simple repair for this is to open the fuel supply line.
Emergency Furnace Repair
One thing that you do not need to attempt and repair on your own is a gas leak. If you smell gas from your furnace or anywhere around the furnace, please call a qualified hvac repair firm promptly. Your furnace might not be functioning due to a leakage such as this and the best thing you can do for the safety and security of your family members and your home is to hire a qualified contractor to repair the leak right away. We can take your call 24/7/365.
Older houses normally vented furnaces through the roof. Newer high efficiency furnaces have air intake and discharge vents that vent horizontally to the outside via the walls of your residence. These vent pipes can come to be blocked with fallen leaves or other debris which can hamper their performance. If you have protective testing covering these air outlets, see to it that they are not totally obstructed with dirt which is keeping air from entering or leaving the system.
A twice yearly check-up of your furnace and central air system will ensure that the initial cold wave will not leave you stuck inside a cool home come Autumn or a blistering residence on the first 90 degree day in the springtime. Regular maintenance is the solution to keeping your furnace in great working order to ensure that when you need it, it prepared to deliver the performance you need.
Furnace Repair Near Me in New Jersey
For repair services, maintenance and good workmanship for your heating system, please call us to deal with your furnace problems. We’re here 24/7 and welcome the opportunity to help you get your furnace functioning correctly once again.
Looking for furnace repair cost? Call us now for a quote and instant phone coupons.