Are you having trouble locating help with Heater Technician Furnace in Livingston, NJ?

|PREVIOUS|MAIN|NEXT|

Livingston hvac service
home >> heating >> livingston-nj >> heater technician furnace

HVAC Repair Companies Near Me

We always suggest calling a professional to repair heating equipment for security and comfort. But there are some quick solutions you can do on your own even before you call us that might get your heat back on.

Begin by inspecting your thermostat. The thermostat must be toggled to “heat” and “on”. If it is a battery-powered thermostat, switch out the batteries if you haven’t changed them in the last year. If you have a programmable thermostat, inspect the date and time is set to be “on” at this time.

Have you checked the circuit breaker for your boiler/heating equipment to ensure it hasn’t tripped? You can turn off the breaker and examine the fuse if the breaker was “on”. You can also turn the switch on and off to make certain the button remains in the ON position. If it doesn’t stay on, you have an electrical trouble with the circuit.

Did this work? If not, just call us.

Call for hvac repair

Gas and Oil HVAC Repair

If you have a gas or oil furnace, you have a gas or oil supply line that is running to your unit. This supply line has a shut off valve close by. You can check to see if in some way over the summer the gas/oil supply line to your furnace was inadvertently turned off. The basic solution for this is to open the gas/oil supply line.

Home HVAC Repair

No or limited air circulation resulting in no heat might be the outcome of a clogged up air filter. To check your Livingston filter, hold it up to the light. If you can’t see light coming through, the filter is clogged and you need to change the filter. It is a great suggestion to buy 2 filters and switch out your filter two times a year, once in the spring and once in autumn. Remember that these air filters are engineered for one-way air circulation. Make sure the filter is put the right air flow direction.

Your heating equipment’s burners can get stopped up or obstructed and consequently, your heater is fouled with debris and this needs to be looked after right now. A certain indication of heater contamination is if the burner flames are yellow, not consistently blue and even. Over the summer season, dirt and soot can accumulate on the heaters and a yearly upkeep cleaning is all it takes to keep your heater's burners working effectively.

Many heating systems have electronic ignitions and these can malfunction. A fast repair is to switch the unit's power on and off to reset the ignition. If this does not fix it, it may be a sign that there is something else causing the pilot to not work properly. This might be a cracked heating element, and if so, you need to have a professional service specialist go over the heating element to check if it is split or otherwise rendered unusable.

What happens if you find your heater isn’t blowing air at all? This can be a trouble with the thermostat, blower motor, transformer, control board or capacitor. At first look, ensure that the blower isn’t blocked in any way. Then, if you have actually examined the thermostat and it is adjusted properly, a service technician needs to take a look at the other reasons noted previously for issues and maybe replacement of that part.

Call for hvac repair

Your heating unit has a control appropriately named a limit switch. A breakdown with this switch may cause the blower to run all the time, even though your thermostat is toggled to “auto”. Identifying if the problem is with the thermostat or limit switch is rather simple. The limit switch is a fail safe type of device: if the unit becomes too warm, the heating element shuts down instantly when it receives a signal from the limit switch. If the blower still runs constantly, but there is no heat, the high limit switch could be to blame and your a/c service technician will change the switch.

Did you know that your heater's door has a safety switch? The access door is wired to make sure that when the door is open, the burners will not light and the fan will not activate. Examine your access panel to make certain that it is fully shut if your furnace is not turning on.

Heating Emergency Repair in Livingston

One thing that you do not need to try and fix on your own is a gas leak. If you smell gas from your heating unit or anywhere around it, please call a certified hvac repair service company immediately. Your equipment may not be working because of a leak such as this and the very best course of action you can do for the safety and security of your household and your home is to get a certified contractor to repair the leak right now. We can take your call 24/7/365.

HVAC Maintenance and Tune Up

Older residences generally vented their heating units up and thru the roofing. More recent high efficiency heaters have air intake and discharge vents that vent horizontally to the outside via the walls of your home. These vent pipes can end up being obstructed with leaves or other junk which can hinder their performance. If you have safety screening covering these air outlets, make sure that they are not totally obstructed with dust which is keeping air from getting into or leaving the system.

A twice annual examination of your heating equipment and central air conditioning system will certainly make sure that the initial cold snap will not leave you stuck inside a cold house come Fall or a sweltering house on the very first 90 plus degree day in the springtime. Routine maintenance is the solution to keeping your furnace in tip-top working order so that when you need it, it prepared to provide the efficiency you need.

Repair Near Me in Livingston

For repairs, upkeep and good workmanship for your heating equipment, please call us to take care of your HVAC problems. We’re here 24/7 and welcome the opportunity to help you get your equipment working properly again.

Looking for furnace repair cost in Livingston? Call us now for a quote and instant phone coupons for heating repair.

Call for HVAC repair